Welcome!
This community is for professionals and enthusiasts of our products and services.
Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.
Pwm 0-10v Cables
Version: Unspecified
Theme: Unspecified
am 29.10.21, 21:45 • 3.944 Ansichten
Is it possible to solder my own pwm cables for ec fans? I need a lot, and considering the sale price it just gets too expensive. Plus none of the plugs even fits my fans. I need to get these through small holes in my walls and therefore would have to desolder and resolder the plugs. I just need a standard pwm signal (0-10v). Could I build my own cables for this application? What format does the main unit give on the output? Is it 0-10v or pwm?
thanks!
ps: i think the Sensors are priced fairly. The pwm outputs are not. Simply adding two pwm outputs cost as much as your entire fan ec unit in another shop - well, actually the gse ec Fan unit is cheaper… :( I do not see the logic in that honestly.
Thanks Alain,
I understand that. But can you still let me know what signal is actuality given out on the port? A 0-10v converter board with read write processor and psu costs 4€ on ebay. It is obviously bulkier than your slim solution and involves some diy, but I would not mind in that case. I just can not spend an additional 700€ for breakout cables….. it’s too much. The whole unit explodes in price with pwm. Or maybe you could think about offering a Bus distributor with pwm built in?
Hi
Next to the RJ45 (Primaklima) and Stereo-Jack 3.5 (Can-Fan) you have a terminal block you can screw your cable to the terminals.
The pricing is depending on the material costs. The 0-10 PWM controller has much more components. The safety for external cables, have read and write processors and a own power supply on board. All this normal sensors don't have.
Ihre Antwort
Versuchen Sie, eine treffende Antwort zu geben.Für Kommentare benutzen Sie bitte die Kommentierfunktion. Sie können Ihre Antworten jederzeit überarbeiten - es ist unnötig, Fragen doppelt zu beantworten. Wichtig: bitte abstimmen nicht vergessen - das ist wirklich hilfreich bei der Suche nach den besten Fragen und Antworten!
Über diese Community
Themes
Hilfeforum
Statistik
| Fragestellung: 29.10.21, 21:45 |
| Gesehen: 3944 -mal |
| Zuletzt aktualisiert: 01.11.21, 11:25 |
Hi
I'm asking to read carefully the description of the product. https://smartgrowcontroller.com/shop/product/sg18-sgc-0-10v-or-pwm-output-4542
Signal output provides 0-10V or PWM signal (Pulse-width modulation) You can set this with a Jumper.
If you need many the price explode, I agree. Until now I was counting with 2pcs for intake and exhaust fan + eventually one more for the Light controller. Under this condition it will be cheaper as a single controller.
Similar as we have made the https://smartgrowcontroller.com/shop/product/sg31-sgc-satellite-12-relay-exit-4954 I plan to make something with I/0 and 0-10V/PWM this will reduce the cost drastic if you need many in and output signal.
I agree the price seams high, I'm obligated to work with distributors and shops to make quantity's, I can not sell directly on e-bay or I will loose our dealers/partners. If they can not make money on it they remove it from the product range.